| Material: | Stainless Steel Wire |
|---|---|
| Hole Shape: | Square |
| Mesh Size: | 1 Inch |
| Surface Treatment: | Galvanized |
| Weave Technique: | Plain Weave |
| Application: | Construction Wire Mesh, Protecting Mesh |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 2>Significantly improve the construction speed
3>Strengthening the crack resistance of concrete
4>It has better comprehensive economic benefits
Technical regulations stipulate that the welding network shall be made of CRB550 class cold rolled ribbed steel bars, or CRB510 class cold drawn smooth steel bars.A piece of welding network shall be welded by the same type of reinforcement.According to the shape and specification, the welding net can be divided into two types: finalizing and customizing.The steel bar spacing and diameters can be different in two directions, but the steel bar in the same direction should have the same diameter, spacing and length, which have been specified in the relevant standards and regulations.The shape and size of customized welded mesh shall be determined by both parties through consultation according to the design and construction requirements and in combination with the specific engineering conditions.
The diameter of welded mesh reinforcement is 4-14mm, in which 0.5mm progressive diameter can be used.Considering the transportation conditions, the length of the welded mesh shall not exceed 12m, and the width shall not exceed 3.4m.The distance between reinforcing bars (or longitudinal bars) in the direction of welding network production should be 100, 150, 200mm, while the distance between reinforcing bars in the other direction is generally 100, 150, 200, 300mm, sometimes up to 400mm.When the longitudinal and transverse rebar of welded mesh are all single rebar, the nominal diameter of finer rebar should not be less than 0.6 times of the nominal diameter of thicker rebar, i.e., dmin 0.6damx.The shear strength (unit N) of the welded mesh joint shall not be less than 150 times the nominal cross-sectional area (unit mm2) of the thicker reinforcement.
Cold drawn round steel bar welded mesh is a kind of high strength, high benefit of reinforced concrete in building material, is the automated production line in the factory, will have the same or different diameter of the longitudinal and transverse reinforcement, respectively, to a certain distance between the vertical arrangement, all the intersection in resistance spot welding of steel fabric together, is a large-scale production in the factory, to replace artificial banding high efficiency new type construction of reinforced steel products.
The diameter of welded wire mesh for cold-drawn round rebar is 4-12mm.
Cold drawn round steel welding network should be CPB550 class cold drawn smooth steel.
ribbed fabric
10 >= 8% elongation delta
Performance: tensile strength Σ b >= 360 mpa
Design strength Y 360Mpa
Surface shape: mesh
Supply status: according to the requirements or construction conditions of packaging
Production standard: GB/ t1499.3-2002 bs 4483:1998
Distance: 50 75 100 125 172 200 225 250 275 325 350 372 400 (mm)
Save rebar consumption: in the same volume concrete structure, compared with ordinary grade I rebar.The design strength of cold-rolled rebar and welded mesh is increased from 210Mpa to 360Mpa, so the rebar consumption can be reduced by more than 30%.In addition, because of the engineering automation production line, the loss of steel mesh is minimal.
Improve work efficiency: the use of steel welding network can save the field steel straightening, cutting, layering and other environment,
It can save more than 70% of working hours, greatly simplify the construction process, accelerate the construction progress and shorten the construction period.
Reduce engineering costs: although the steel welding network unit price is higher than the scattered reinforcement.However, the comprehensive consideration of material consumption, construction speed, labor costs, material loss, site processing costs, machinery processing costs and other factors, can save more than 30% of steel, shorten the construction period of 50% to 70%, reduce the project cost of more than 15%, with considerable economic benefits.
Anping Yaqi Wire Mesh Products Co., Ltd. was founded in 2001. It is a professional enterprise in research and development, production and sales of various wire mesh and metal products, is a wire drawing, galvanized, meshes deep processing industry and trade integration of large enterprises.
We have advanced equipment, rich expertise and scientific production procedure, strict quality control system. During the past years, we have been striving to develop and improve ourselves. Our products exported to Europe, Southeast Asia, the Middle East and around the world, get high praise from domestic and foreign customers and an excellent reputation for superior quality.
Our main products are: Galvanized Iron Wire, PVC coated Wire, Binding Wire, Black Iron Wire, U Type Wire, Small Coil Wire, Cutting Wire, Barbed Wire, Hexagonal Wire Netting, Wire Mesh Fence, Welded Wire Mesh, Gabion Mesh, Square Wire Mesh, Crimped Wire Mesh, Expanded Metal Mesh, Razor Barbed Wire, Chain Link Fence, Grassland Fence, Window Screen, Perforated Meta, Hexmesh, Wedge Wire Screens, Filter Element, Filter Cylinders, Filter Discs.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}