| Customization: | Available |
|---|---|
| Material: | SUS304 |
| Hole Shape: | Square |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stainless Steel Gas Liquid Knitted Wire Mesh For Filter
Knitted wire mesh is also called knitted wire or knitted mesh, Knotted mesh, Knotted wire, Knotted wire mesh, Chain mesh, Wire net, Wire netting, Silt mesh, Mesh stocking, Wire mesh stocking, Sock mesh, Stretchy mesh, Holey mesh, Mesh ribbon, Chicken wire, Metal bag, Knitted copper, Interwoven metal, Interlocked wire, Wire protector and Wine bottle mesh.
Almost any material that can be drawn into a wire or filament can be used to produce a knitted mesh. Round wires from 0.11mm to 0.35mm diameter are most commonly knitted, but for special applications it is possible to knit wire as small as 0.03mm or as large as 0.8mm in diameter.
Knitted Wire mesh is made from knitting of various wire materials including stainless steel, copper, synthetic fiber and other materials.
Main Materials Applied for Knitted Mesh:
Monel knitted wire mesh has good corrosion resistance in all extreme environments and it is reasonably conductive and is tough with high tensile strength, giving good wear characteristics.
Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted meshes, combining low contact resistance with a small degree of permeability. It is not suitable for highly abrasive applications where the TIN plating may wear away to expose the copper. The corrosion resistance of tinned copper clad steel knitted wire mesh is suitable for most applications.
1. Wire diameter range: 0.10mm-0.55mm (common wire through is: 0.20mm - 0.25mm).
2. Hole size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same, width is different).
3. The surface condition of the Knitted Wire Mesh: The flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications)
4. The common width of Knitted Wire Mesh: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400, 500 mm, 600mm, etc...
5. The main material of Knitted Wire Mesh: Aluminum wire, stainless steel wire, galvanized wire, fibre wire, plastic wire, PP, PC, PE, PVC, etc.
6. Main purposes: Mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device.
Aluminum knitted wire mesh is mechanically weak and will readily take a compression set and this combined with its readiness to form a non-conducting oxide. Stainless steel knitted mesh is often used as a protective final layer over the other knitted mesh gasket, materials on order to provide a wear-resistant contact surface. Aluminium knitted mesh is for numerous aerospace and nuclear applications
Post-knit processing of knitted wire mesh is an important step in transforming the knitted material into knitted wire products. There are a variety of post-knitting processes methods as below:
Application: Knitted wire mesh products are applied to those applications including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special service applications.
Stainless steel filter disc security screen wire cloth
1.Material:
2.Weaving Characteristics:
plain weave, twill weave, plain dutch weave and twilled dutch weave.4.Applications:
Printed Circuit Boards;Solar cell;Membrane Switch;Electro Luminescent,Solder mask
){kind=link}